 |
Locking
Ring, base with strength member connections
and one tray assembly. |
|
Do
not use damaged sleeve nor trim Heat- shrinkable
sleeve before installation. |
|
Remove
any dirt, mud or other contaminations from the
cable sheath with a clean cloth. |
|
Remove
the cable sheath over a length s local approved
practice. |
|
Cut
central strength member with distance of 75mm. |
|
Crimp
Shield clip on cable sheath with pair of pliers. |
|
Select
a transportation tube over fibre and loose tube. |
|
Take
care to use a appropriate kit which converts
the slotted cable construction in to a loose
tube construction. |
|
Clean
the port and cable with the cleaning tissue |
|
After
each splice , it should be stored in the splice
holder. |
|
Take
care ad do not deform the splice protector during
insertion. |
|
On
completion of splicing, install the protective
cover. |
|
Slide
the Jt. Closure dome onto the base .Align properly
and fit the split locking ring over the transition
holding and base together. |
|
Wrap
the adhesive strip around the dome and base
interconnection. |
|
Shrink
the sleeves till the edges of the sleeve have
come down till the flow of red adhesive should
be visible |
|
Allow
the sleeves to cool down and move the closure.
Now yr .Fibre optic Closure is ready to mount
for storage. |
